What are the areas where stable soil mixing plant equipment is most prone to wear and tear?
The stabilized soil mixing plant equipment is widely used in the construction of small and medium-sized roads today, improving construction efficiency for roads in various regions. However, the long-term use of the mixing machine equipment will always cause varying degrees of wear and tear, thereby affecting the quality and efficiency of the equipment's work in the later stage. Usually, we perform regular maintenance work on the equipment. However, maintenance work on parts of equipment that are prone to wear and tear is often overlooked by maintenance personnel, resulting in more severe wear and tear in the later stages of the equipment. So what are the most common areas of wear and tear on the equipment of the stabilized soil mixing plant?
1、 The most prone area for wear and tear on the equipment of the stabilized soil mixing plant is the mixing blade of the mixing machine. Due to the long-term soil penetration operation of the mixing machine blade, the wear speed of the blade is too fast. If the mixing blades of the equipment are not replaced in a timely manner, it will lead to a decrease in construction efficiency or low construction quality in the later work of the equipment.
Secondly, the mixing shaft of the stabilized soil mixing plant is also the most susceptible to wear and tear, as the mixing machine equipment generates a large amount of dust during operation, which leads to contamination of the lubricating oil on the mixing shaft by dust, thereby accelerating the wear rate of the mixing shaft. So regular lubrication of the mixing shaft is also important.
Thirdly, the transmission device for stabilizing soil can cause excessive working pressure on the transmission state of the mixing machine equipment under high pressure, resulting in wear and tear.
When maintaining a stable soil mixing plant, only by doing a good job in maintaining the easily worn parts of the equipment can we reduce accidents during operation.